Try Alternative Sources of Energy for Self Sufficiency

Homeowners , take a look at are one of the crucial documents you’ll ever have prior to purchasing a house! The one thing every homeowner or prospective homeowner should be aware of is this as a homeowner, you are the sole person responsible to ensure your new house is going to function properly and is an energy efficient residence.

This document is intended for homeowners to be able to comprehend city inspections. This document does not refer on the third-party inspection done by a professional licensed Home Inspector.

If you’re worried about the efficiency of energy use in your new residence, the single most significant factor that affects the energy consumption and the monthly cost of energy can be found in the dimension of your home. The amount of energy required to operate your home is directly linked to the shape, size and size of your house. Today, home builders aren’t providing potential buyers with two essential pieces of info that you must know about the efficiency of energy used by the home you are considering or you are comparing homes of two different builders. For more detail about energy sources visit

https://pot-scape.com/

If an engineer designs and measures an AC system for a structure big or small, he utilizes the load calculation method to determine the amount of cooling and heating capacity is required to service the building. This same method and approach is expected to be utilized in the construction of new homes in Texas. Builders in Texas have built houses within Texas since 2001, but they do not comply with the requirements of the energy code standard or design guidelines. The load calculation process is the initial and most vital step in designing a home to improve energy efficiency, however it isn’t being done by builders today. This is due to the fact that most builders don’t pay attention, comprehend the energy code, or comprehend load calculations.

Another issue is that the majority of homeowners haven’t heard of it , and aren’t aware about it either. Many homeowners think that someone else is handling the issue for them. As I mentioned earlier in this guide , this isn’t the case and is not it is not being done.

Homeowners Have To Take Responsibility

How do homeowners be aware that one house performs better than the other? The method employed to

The efficiency of your home’s performance in relation to air and heating cooling systems is built on an energy unit called the “British Thermal Unit” (BTU). I’m not going to go into detail here, however I will give homeowners the data that you will need to take home shopping and it’s actually very easy.

Three Efficiencies Regarding Home Building

1. Thermal Efficiencyis determined through the methods used in home construction and the materials used

that is used to construct the house. It is the biggest effectiveness in building homes.

2. Energy Efficiency measured and calculated using an energy conversion

(KW/BTU) to useful heat/cooling BTUH for work.

3. Overall Efficiency is the sum of both efficiency over. Thermal Efficiency

will have a significant effect on Energy Efficiency rating and therefore will affect the rating.

Overall efficiency of the efficiency of the home.

As a homeowner , this is the information you must be aware of. How much energy needed to cool and heat the home directly connected to the degree of heat gain your home experiences when it’s hot outside, and the amount of loss of heat your home suffers when it’s cold out. This heat gain and loss are quantified in BTUS. It is the amount of heat loss and heat gain is determined and measured on an hourly basis , which means the measurement is made in BTUH. It stands for BTUH, which is British Thermal Units Per Hour. The more efficient the thermal efficiency of your home, the less the use of energy. As a homeowner, you’ll get a higher return on investment for every dollar you invest to make your home more energy efficient than to build a very inefficient thermally efficient house, and attempt to improve the efficiency of the whole house with expensive, high-end HVAC and heating equipment. This strategy will never perform over the entire life of your home.

If you are a homeowner, there is another measure or factor to take into consideration and that concerns the “Return on investment” (ROI) of your investment. If you decide to take short cuts to your home’s construction aspect and then purchase expensive top of the line AC equipment to compensate you will end up paying many more dollars in the future due to costly repair costs. The repair cost for expensive AC equipment is extremely expensive.

Here is a basic but true illustration.

14 SEER AC System – Replace a malfunctioning inside fan motor. Cost= $250.00

20 SEER AC System – Replace a damaged outdoor fan motor. Cost= $1200.00

The most recent systems are complex and contain a large number in electronic parts that’s vulnerable to power issues and lightning strikes in storms. If you are a homeowner, it is important to take this into consideration when building your home. It is the best option to have the lowest cost to maintain and manage. Homeowners must spend dollars to make their homes more energy efficient, and also use an AC system(s) with ratings of 15-15 SEER rather than 20 SEER systems.

The Questions a Homeowner Needs to Ask a Home Builder

Mr. Builder, what’s the temperature gain for this house on July 15th, at 3:00 pm at the end of afternoon?

Once he is able to recollect his thoughts, He will likely reply by asking: What are you referring to? This will give you a solid clue. He doesn’t know anything about the efficiency of thermal energy for the homes he’s creating!

“You might want to think about building a new house right now!”

Mr. Home builder , what’s the loss of heat for this home on the 15th at 3:00 in the early morning?

These are the kinds of questions prospective buyers must ask concerned about energy efficiency or the monthly cost of energy for their house. If you’re an owner of a home that operates on an annual budget, the efficiency of your energy usage is crucial for the new house you purchase. We will use this example below to illustrate how the actual power efficiency and energy consumption of the two houses can be measured.

Home A- one story that has two hundred and fifty-five square feet of air-conditioned living space. It is an the entire home is electric, with all appliances are energy star certified and light fixtures use compact fluorescent as well as the high efficiency kind. The house has an energy efficient 5 ton 14 SEER AC system.

The temperature gain for homes in July is 49,500 Btuh.

The loss of heat for homes in January is 72,000 Btuh.

– Home B- one story that has two hundred and fifty-seven square feet of air-conditioned living space, all electric home, appliances are energy star certified and light fixtures use compact fluorescent as well as the high efficiency kind. The home is equipped with a four ton 13 SEER AC system.

The average temperature for homes in July is 44,000 Btuh.

The loss of heat for the house for January is 66,000 Btuh.

Which one is more efficient? A lot of homeowners will prefer the Home A just because it has the biggest AC system as well as the highest SEER rating among the two homes. The most efficient house would be Home B. This house is larger and has the smaller AC system. What’s more, despite the less SEER-rated rating of the AC system, the unit is estimated at 4 tons, and is capable of cooling the home effectively. The distinction between heat gain and loss is what makes homes B the most energy efficient. A large AC system is not what makes the home more efficient. The AC systems used in homes are designed to match both the energy gain as well as loss numbers of the home. In general, the smaller the loss amount, the higher it is the “Thermal Efficiency” is for the house. What makes a home more efficient is its dimensions, construction, the how the house is positioned the wall, window type walls, construction of the wall and insulation levels to name some. The efficiency of the thermal energy in the building is dependent on the construction techniques and the materials used, not heating and cooling equipment. The AC equipment makes only some difference in its conversion into electrical power, or the conversion of fuel into work-cooling output (Btuh) or heating output. If the SEER rating is higher, this means that electrical energy conversion is much more productive, and thus the cost of energy is lower for homes. A home that needs three tons of AC system to support the cooling requirements is less efficient when the home has a 5-ton system, regardless of the SEER number.

Example:

Home C has an 12 SEER, 3 Ton air conditioning system that is correctly designed and functions well

– Home C- that has an SEER of 16 and a 5 tons AC system is not functioning properly and cause the home to be uncomfortable as the system is able to short cycle and reduce the efficacy (SEER) for the AC system.

Homeowners shouldn’t be fooled by the larger is better sales campaign! More isn’t always better when it comes to AC systems!

Let’s discuss heating systems today. If you’re building a new house or buying a new house or buying an existing house you must consider the way your new house is heated. Heating homes today isn’t the same as it was in the past. My first preference for heating your home is to use propane or natural gas system. I enjoy the warm and comfortable feel of the gas system. In the past, it may be considered to be the most cost-effective way to heat your home. In the current constantly evolving market for energy, the cost of MCF natural gas isn’t always the lowest cost of operation. I’ll list the different methods for heating homes according to cost as well as reliability, comfort and security.

The Southern Part of the Country

1. Gas Heat – If the cost of propane or natural gas is lowest on a regular basis

2. Heating Pump Systems – In the event that your house is entirely electric, the installation of a heat pump is an absolute necessity for energy

efficiency.

3. If the house is entirely electric, the best option is electric resistance heating. This is an extremely

A costly choice for heating.

The Northern Part of the Country

1. The price of fuel oil is if price of fuel oil remains lower than propane or natural gas on a regular basis

2. Natural Gas is the second option to go with electric heating.

3. Heat Pump System- If your home is completely electric, heating, a heat pump system is essential for energy efficiency

efficiency.

4. If your home is completely electric, the best option would be to use electric resistive heating. It is a great option.

Heating is a costly option.

5. In places where wood is plentiful and the home is equipped with the right heater made of wood.

Home AC System Design

Questions to Ask Your Builder

1. What is the temperature gain to the home? July 15th 3:00 PM _____________ Btuh

2. What is the energy loss for your home? January 15th 3:00 AM ______________Btuh

3. What number of systems (systems) are there in the home?

Recommendations

Single Story Homes smaller than 2000 sq feet- Single System

A Two Story Home with less than 2000 sq feet2 Systems One up and one down stairs

Single Story Homes with a lot larger than 2000 square feet- You must consult with a mechanical engineer who has expertise in

Energy efficiency strategies and conservation. Request references. Suggest

Someone who is not related to anyone not related to AC contractor to achieve the most objective idea and the best solution.

Discuss the heat loss/gain in your AC technician or mechanical engineer in order to figure out

What is the best way to reduce these numbers by making modifications in the materials and design to

Your home.

4. 6. Request an AC contractor’s name as well as references. Contact homeowners who have resided living in their homes for more than two years. This will provide you with more insight into the quality of the design by the contractor and constructed the AC system and also how it functioned during both heating and cooling seasons.

5. Get the contractor to give you estimates in writing for replacing the motor for indoor fans as well as the compressor of the AC systems you’re thinking of. If you’re trying to choose between a system that is with a SEER rating of 15 and one that is rated at 20 SEER, this will allow you to understand the total cost and what the ROI will be over the course that of your system(s).

6. If you’re considering purchasing a property that requires major work as well as the heating and cooling system will need to be replaced, it is important to ensure you know the following information regarding your AC contractor you select.

Is the contractor licensed?

– Is his current license in place?

What amount of insurance for general liability does he hold?

Does his insurance policy remain in good standing?

What number of technicians are going to you have at your home?

Are these technicians certified by the state? A Texas state Texas obligation

Are you able to check this company out through the Better Business Bureau?

Ask for an official copy of his licence and the insurance policies.

Check that the current status of your insurance policy with the policy’s provider It is vital to check this.

Insurance Requirements for AC Contractors Texas (Verify Requirements for Your State)

Owners of homes AC contractors working in Texas must carry an insurance policy for general liability for the purpose of performing work in Texas. In 2003, the state of Texas has stopped requiring AC contractors to prove that they possess general liability insurance before renewing their license every year. This puts homeowners in danger throughout Texas when hiring and using AC contractors. As a homeowner, you have to be proactive and ensure that the AC contractor you’re working with is covered by current insurance for general liability. policy.

Holders of Class A licences must have an $300,000.00 policy.

License holders of Class B must carry an $150,000.00 policy.

Homeowners, you must determine whether the worth of your property and personal belongings are greater than the limits set by your AC contractor you choose to hire. Ask your homeowner insurance company how this affects homeowners should your home is destroyed or damaged due to inadequate workmanship or defective equipment. You might want to request your contractor to offer an additional level of liability insurance prior to starting construction in your home.

Homeowners should not be the victime of unlicensed or insured AC contractor!

Third Party Inspections and Resources

Many homeowners and cities have recourse to third party inspectors in the present. As a homeowner, you’re the one who is ultimately responsible to ensure that your home and investment is secure. It doesn’t mean that an inspector from a third party does not mean that they’re better than the local code official. I suggest that you spend the time to meet to two inspectors or more in order to figure out which one you think is the best choice that will ensure that you get the most price for your money as well as the most efficient AC equipment for your house. I would always suggest homeowners speak to their friends, neighbors, and family members to determine whether they are able to offer helpful advice or guide you away from people who don’t know the issues they face. A few phone calls or a few minutes of talking with someone could help you save thousands and headaches.

Summary

Homeowners, if you’re thinking of buying a home, you’ve got many things on your plate. It is important to consider the AC system(s) to be installed in your new house are an essential part of the puzzle in ensuring you are happy and content with the new house you have purchased. We have covered a great deal of details in “The Home Buyer’s Handbook for AC Systems” and I think you’ve gained some useful techniques and lots of information about air conditioning and heating. Don’t let it be a burden, instead, follow the order of steps in deciding which HVAC and cooling system you want to install in your home. If you apply the information you’ve learned and then begin to talk about it with homeowners and AC contractors, you’ll realize that they aren’t likely to be flexible and willing to work with you. If homeowners and AC contractors realize that they are dealing with a prospective homeowner who is knowledgeable about AC systems, they will feel slightly uncomfortable. This is to tell homeowners that construction along with AC contractors have been doing it in their favor for an extended long time. It’s the time for homeowners to get the most effective AC equipment for new home. This can be done and you will be very

Leave a Comment

Your email address will not be published.